US20140183875A1, Method and apparatus for direct energy conversion, is the third public version of Eddie Sines's light-switched superconducting generator. The Google Patents record gives application number US14/151,722, filed on 9 January 2014 and published on 3 July 2014. The application describes itself as a continuation-in-part of US12/308,049, the application that became US8736085B2 (see US20090315337: Eddie Sines's Patent Application for Direct Energy Conversion with Superconducting Vortex Tubes (filed 2007) and US8736085B2: The Granted Sines Direct Energy Conversion Patent, Its Prior Art and Its Lapse (2014–2026)). This filing's description dates US12/308,049 to 26 May 2009. The record also lists it with the 13 June 2007 date of the PCT application PCT/US2007/013800, which is the date the dossier's page on the original application uses. Its priority runs back to provisional application No. 60/813,341 of 14 June 2006. It went on to issue as US9080557B2 on 14 July 2015.
Its main value to the dossier is the comparison. Most of the mechanism is carried over from the earlier filings. What changes is an added two-channel configuration and the removal of nearly every performance number the original application had offered.
What the filing claims, and what stayed the same
The core claim has not changed. According to the patent, a magnet's static flux can be steered back and forth between two return paths without any moving armature. The steering is said to be done by a bundle of coated tubes, which the patent calls the vortex channel, switched in and out of superconductivity by laser light. While the YBCO film is superconducting, the patent says the channel behaves like an ideal inductor of unlimited permeability and carries the flux through path B and coil B. When photons break the Cooper pairs, which the patent calls photon Cooper breaking, the channel is said to revert to a ceramic with the permeability of air. That adds what the text calls a massive air gap and diverts the flux to path A and coil A. The patent says the resulting change in flux induces current in the windings by Faraday's law and Lenz's law.
In the exemplary build, the vortex channel is a bundle of approximately 500 tubes. The patent sets 1.0 inch as each tube's length and 0.0125 inch as the upper limit on its outside diameter. The layers are, in order:
- a Y2O3 buffer stabilised with ZrO2
- a cerium oxide (CeO2) layer, which the patent says brings the lattice mismatch to about 0.5%
- the YBCO film
- a very thin layer of Parylene
The filing says YBCO has a very sharp resonance at 930 nm and absorbs photons there at extremely high efficiency. It gives no measurement or reference for this. Liquid nitrogen in a Dewar vessel cools the device, and a battery powers the laser and a control circuit that pulse-width-modulates the laser. The six-step process ends when the nitrogen has completely evaporated.
The background section keeps the inventor's notion of an atomic force. In this idea, paired electrons act like compressed springs whose stored energy is released when they absorb photons. The description also notes that the YBCO film, while superconducting, is a perfect diamagnet rather than a ceramic.
What is new: two channels in push-pull
The addition is a design with two vortex channels, shown in FIGS. 8–10. Each channel sits in its own magnetic path, A and B, and has its own solid-state laser. As the patent describes the cycle, the magnet's flux is first toggled into path A, and through coil A, while channel A is superconducting. Channel A's laser then fires and returns that channel to its normal, off state. A brief pause follows, which the filing names the Dead Time. During it, flux is toggled into path B, whose channel is still superconducting. Once the pause ends, channel B's laser fires and ends B's superconducting state, and the switching circuitry repeats the cycle. The filing defines the Dead Time as the gap between the turn-off and turn-on of the two laser channels, and credits it with making laser control more efficient.
The patent likens this arrangement to the Full-Bridge or Push-Pull topology of a switch-mode power supply (SMPS), but "with improved switching efficiency". It gives no figures for that improvement. It also asserts that:
- compared with the single-channel version, the paired channels double the permanent magnet's total magnetic flux
- because paths A and B are of equal length, the output waveform is fully symmetrical
- the device can supply either AC or DC
- it can imitate a 60 Hz supply "without any phase error or distortion"
Standard SMPS integrated circuits and resonant power chips are said to be usable as drivers. Two hardware details are also new:
- Lamination on the magnet pole. It is said to give room for more permanent magnets and so raise output power.
- Waveguide dispersion optic. Its sides are coated with silver or aluminium, and only the face against the vortex cylinder is left uncoated. The patent says this allows a cheaper fibre-optic interface.
What has been removed
The original application gave a 1 watt laser, a quantum efficiency of at least 30%, about 2000 gauss at the magnet poles, a conversion efficiency of about 99.8%, a 10 KW surplus and a theoretical switching optimum near 1 megahertz. Even then, it marked its output curve as based on a hypothetical prototype. This continuation states none of those numbers. On the laser, it says only that the wavelength and power output are to be chosen for maximum electron-photon conversion efficiency. It still says the nitrogen boils off from waste heat produced while generating electricity, but it does not quantify that heat.
The result is that the filing describes a more elaborate device while making fewer checkable statements about it. It gives no input power, output power, efficiency, measured waveform or test of any built unit.
The record around the filing
Among this filing's classifications is F03G7/092, a group for motors said to follow new scientific theories, with zero-point energy and the Casimir effect as examples. It also carries the superconducting-switch groups H10N60/30 and H10N60/355 (power cryotrons). As with the H02N11/00 group noted for the earlier filings, these are filing categories, not findings about the device.
The record lists four citations:
- the earlier Sines patent, US8736085B2
- Craig Travers's Engine using the transition state of a superconductor to produce energy
- a US Navy Flux compression generator
- a Yong Jihn Kim superconductor patent
Later documents citing it include a Silicon Turbine Systems application titled Improved vortex flux generator and Persistent current switch filings from Technische Universiteit Delft. A citation is a bibliographic link between documents, not an endorsement of the device or a test of it.
The resulting patent, US9080557B2, was assigned to AQEDD, INC of Virginia on 30 August 2018. The record shows 4th-year and 8th-year micro-entity maintenance fees paid on 3 December 2018 and 14 December 2022. It lists the patent as active, with anticipated expiration on 13 June 2027. US8736085B2, by contrast, lapsed in 2026 for non-payment.
What the document does and does not establish
The filing documents how Sines's design developed from the original application to this 2014 version, and that the family was kept up through the US9080557B2 line. It does not establish that a vortex channel was ever made or switched, or that light-modulated flux produced more electrical energy than the laser and cooling consumed. The record counts 18 claims. Because the differences traced here are in the description, how the claim wording changed between filings is still an open question for the dossier. As Patent as Evidence explains, a grant is not evidence that a device works.
Source notes & attribution
- https://patents.google.com/patent/US20140183875A1/en